有限群共轭类长度的一点注记

假设G=AB是子群A和B的互相置换积。通过A?B中元素的共轭类长度给出了群G的结构，推广了一些最近的结论。     

有耗介质层上多导体传输线的电磁耦合时域分析方法

目前,针对空间电磁场作用有耗介质层上传输线的电磁耦合,仍缺乏有效的数值分析方法.因此,本文提出一种高效的时域混合算法,很好地解决了有耗介质层上传输线电磁耦合建模难的问题.首先,对经典传输线方程进行改进,推导了适用于有耗介质层上多导体传输线电磁耦合分析的修正传输线方程.然后,结合时域有限差分方法和相应插值技术,求解修正传输线方程,获得多导线及其端接负载上的电压和电流响应,并实现空间电磁场辐射与多导线瞬态响应的同步计算.最后,通过相应计算实例的数值模拟,与CST软件的仿真结果进行对比,验证了时域混合算法的正确性和高效性.     

System-size effect on the friction at liquid-solid interfaces

The friction at the liquid-solid interfaces is widely involved in various phenomena ranging from nanometer to micrometer scales. By the molecular dynamic(MD)simulation, the friction properties of liquid-solid interfaces at the molecular level are calculated via the Green-Kubo relation. It is found that the system size will influence the value of the friction coefficient, especially for the solid surfaces with the larger polar charge. The value of the friction coefficient decreases with the increase in the system size and converges at large system sizes. The large polar charge will lead to a significant friction coefficient. However, the diffusion of water molecules on this surface is almost a constant, indicating that the diffusion coefficient seems to be independent of the system size and polar charge. This work provides insights for the selection of the system size in modeling the frictional properties of hydrophobic/hydrophilic surfaces.     

毛冬青总皂苷对大鼠脑缺血再灌注损伤的保护作用及血液微量元素影响

目的研究毛冬青总皂苷对脑缺血再灌注损伤的保护作用,并初步探讨其血液微量元素的影响。方法动物随机分为假手术组、模型组、毛冬青总皂苷(高、中、低)剂量组及阳性药物对照组,运用大鼠大脑中动脉栓塞,制作脑缺血再灌注损伤模型,缺血10 min后,给药组及阳性药物组于舌下静脉给予高、中、低剂量的毛冬青总皂苷及假手术组、模型组给予等体积的溶剂。缺血60 min再灌注24 h后,每组取8只大鼠断头取脑,TTC染色,测定脑梗死体积;取血,测定血液中3种微量元素Ca、Zn、Cu的含量。结果毛冬青总皂苷组与模型组相比,毛冬青总皂苷治疗组脑梗死体积减小,病理变化较轻;模型组与假手术组比较血液中Ca、Cu含量增加明显有统计学意义,Zn含量明显降低与假手术组比较有统计学意义(P0.05),毛冬青高、中、低剂量组与模型组比较Ca、Cu含量明显降低,Zn含量明显升高,而且呈明显的量效关系,与模型组比较有统计学意义(P0.05)。结论毛冬青总皂苷对脑缺血再灌注损伤具有一定的保护作用,其保护机制与毛冬青总皂苷抗氧化作用及增强氧自由基的清除有关。     

Synthesis of Indolophanes by Photochemical Macrocyclization

Herein, we report the synthetically practical, short, and general access to novel indolophane architectures by means of a photochemical C?H activation process—the Witkop cyclization. These highly strained scaffolds were obtained by photoinduced ring closure and feature atropisomerism as well as aromatic ring current effects, which both have been investigated. The prevailing regioselectivity of theWitkop cyclization reaction was completely reversed by the presence of a quaternary carbon center, exerting a strong Thorpe–Ingold effect on the system for which experimental‐evidence is provided.     

Salt effect on molecular orientation at air/liquid methanol interface

The salt effects on molecular orientation at air/liquid methanol interface were investigated by the polarization-dependent sum frequency generation vibrational spectroscopy(SFG-VS). We clarified that the average tilting angle of the methyl group to be u = 308 58 at the air/pure methanol surface assuming a d-function orientational distribution. Upon the addition of 3 mol/L Na I, the methyl group tilts further away from the surface normal with a new u = 418 38. This orientational change does not explain the enhancement of the SFG-VS intensities when adding Na I, implying the number density of the methanol molecules with a net polar ordering in the surface region also changed with the Na I concentrations. These spectroscopic findings shed new light on the salt effects on the surfaces structures of the polar organic solutions. It was also shown that the accurate determination of the bulk refractive indices and Raman depolarization ratios for different salt concentrations is crucial to quantitatively interpret the SFG-VS data.     

基于DIS数字信息化系统对透光物质透光性能的研究

采用DIS数字信息化系统,对不同浓度的蓝墨水溶液在激光光源照射下的透射平均照度及照度分布图像进行实验研究,得到了平均照度值随溶液浓度变化的规律。对不同颜色塑料膜片对白炽灯光源透过照度值及照度分布图像进行实验研究得到及其相关之规律。     

Modeling and testing of snow penetration

Penetration by a cone into snow is commonly used to characterize snow properties. However, the effects of the diameter and half-angle of the cone on the mechanical properties of snow have not been systematically studied. In addition, no estimation of material parameters in a physically-based model has been made such that the results from penetration provide only an index of snow properties. In this paper, modeling and experimental methods are used to examine the effects of cone geometry on the maximum penetration force and associated hardness, with penetrometers ranging from 2.5 to 4 mm in diameter, 15° to 45° in cone half-angle, and testing both fine-grained and coarse-grained snows. The material point method, in conjunction with the Drucker–Prager cap plasticity model, was used to obtain the theoretical penetration force-distance relationship. Global sensitivity studies were conducted that indicate that the cohesion accounts for 86% of the penetration force, followed distantly by friction angle which accounts for 27%. A general trend, for the simulation results was established: for a given half-angle, the penetration force increases with the increase of diameter which holds for most of the test data as well; for a given diameter, the penetration force decreases with the increase of half-angle, which holds for some of the test data. In addition, for a given half-angle, the hardness decreases with the increase of diameter; for a given diameter, the hardness decreases with the increase of half-angle. To take into consideration the uncertainty of test data, a simple interval-based metric was used to compare test data with simulation results; the comparison was satisfactory. The material parameters from the simulations can thus be considered as calibrated ones for the snow studied.